|
【】 Nylon Sheet 【】
| |
Autai
>> Nylon
>>
【】 Nylon Sheet 【】
The nylon sheet is a generic designation for a family of
synthetic polymers known generically as polyamides, first produced on
February 28, 1935, by Wallace Carothers at DuPont's research facility at the
DuPont Experimental Station. Nylon is one of the most commonly used
polymers. Nylon sheet is difficult to get the proportions exactly
correct, and deviations can lead to chain termination at molecular weights
less than a desirable 10,000 daltons (u). To overcome this problem, a
crystalline, solid "nylon salt" can be formed at room temperature, using an
exact 1:1 ratio of the acid and the base to neutralize each other. Heated to
285 °C (545 °F), the salt reacts to form nylon polymer. Above 20,000 daltons,
it is impossible to spin the chains into yarn, so to combat this, some
acetic acid is added to react with a free amine end group during polymer
elongation to limit the molecular weight. In practice, and especially for
6,6, the monomers are often combined in a water solution. The water used to
make the solution is evaporated under controlled conditions, and the
increasing concentration of "salt" is polymerized to the final molecular
weight.
|
|
|
|
-
Model: PA-2040 Nylon Sheet
-
Features: Thickness.
8mm ~ 50mm
-
Color: Translucent Milky
Color
PA-2040 Nylon Sheet is produced by virgin nylon
PA6, PA66 with injection molding, extrusion and
blow molding, etc. Nylon Sheet is recognized as
the most widely used and known engineering
plastic in the current market. 6 Nylon Sheet has the best
performance, very tough, even at low
temperatures, and high hardness in the surface,
toughness, mechanical lower shock, and abrasion
resistance. Combined with these characteristics
and good insulation, and chemical properties, it
has become common-level materials. Its widely
used in a variety of mechanical structures and
spare parts. Compared to PA6, PA66 own the higher
hardness, rigidity, a good resistance to wear and
heat deflection temperature. Apply to Bearings,
gears, wheels, roller shaft, water pump impeller,
fan blades, oil delivery pipe, oil storage pipe,
rope, fishing nets and transformer coil.
Specifications:
1. High strength and stiffness
2. High impact and notch impact strength
3. High heat deflection temperature
4. Good at dampening
5. Good abrasion resistance
6. Low coefficient of friction
7. Good chemical stability against organic
solvents and fuels
8. Excellent electrical properties, ease of
printing and dyeing
9. Food safe, noise reduction.
10.Thickness: 8-50mm
11.Size: 1000mm x 2000mm etc.
|
|
♦ PA-2080 Nylon
Tube
|
|
|
|
Nylon Tube is produced by virgin nylon PA6, PA66
with injection molding, extrusion and blow
molding, etc. Nylon
tube is recognized as the most widely used
and known engineering plastic in the current
market. Nylon 6 Tube has the best performance,
very tough, even at low temperatures, and high
hardness in the surface, toughness, mechanical
lower shock, and abrasion resistance. Combined
with these characteristics and good insulation,
and chemical properties, it has become
common-level materials. Its widely used in a
variety of mechanical structures and spare parts.
Compared to PA6, PA66 own the higher hardness,
rigidity, a good resistance to wear and heat
deflection temperature. Apply to Bearings, gears,
wheels, roller shaft, water pump impeller, fan
blades, oil delivery pipe, oil storage pipe,
rope, fishing nets and transformer coil.
|
|
|
【】 Nylon Sheet 【】
